|
AVC-301M - 1.4GHz Pentium M Miniature
Vehicle
Computer
|
|
AVC-301M is a miniature PC computer running Windows NT/2000/CE/XP The computer is built for Vehicles. AVC-301M has growth capability options, such as various input output cards, more serial ports, Sound, Video, A/D, 1PPS Sync. etc'.
|
|
- 9-36VDC per MIL-1275A Power Supply
- Pentium M 1.1GHz or LV 1.4GHz
- Internal Flash Disk.
- 2MBytes high performance cache
- 4 to 16 Serial Ports RS-232/422 Interface
- XVGA (Intel Extended Graphics II Controller)
- Up to 4 x USB 2.0
- Up to 4 x 100/100BaseT LAN
- MIL-STD-810F
- MIL-STD-461C
- Extended Temperature Range (-55ºC to +71ºC)
Extended Temperature Range
-55ºC to + 71ºC
Options
- Up to 8.0GB Removable PCMCIA.
- Sound
- Video
- A/D
- GPS, 1PPS
- CAN BUS
|
Dimensions
131x100x250 (WXHXL) [mm],
5.15"x4.0"x10.0" (WXHXL),
Weight
5.0Lbs
Download Installation Details
|
|
Typical Configuration
The following represents a
typical configuration of the AVC-301M.
|
|
- Processor - Pentium ®M LV 1.4 GHz
- Chipset
- Intel
82855GM, 400MHz FSB, integrated
graphics
- DRAM - 512MByte or -1.0GByte.
DDR-SO-DIMM,
- CACHE -
2M 2nd Level
- Supports FLASH Disk
- Sound -
AC97
controller, line-input /output
|
|
- Video Controller - Intel Extreme
Graphics2
32 MByte Video RAM
- Resolution - Up to QXGA 2048x1536
- Ethernet - 10/100Base-T Intel ®82562
- USB - up to 4 USB
2.0 OHCI ports
|
|
AVC-301M Construction
The
AVC-301M PC is designed and constructed in accordance with the general requirements
of MIL-STD-454.
|
|
|
|
Thermal
Design
The cooling of the components on the AVC-301M PC cards, Power Supply and the Pentiums chip is accomplished by conduction through the aluminum enclosure of the unit which is built as an heat-sink.
External Connectors
External connectors are used for
interfacing with the subassemblies or equipment and are in accordance with
requirement of MIL-STD-454. Connector mating bodies are keyed, and
keyed locations are varied to prevent improper installation.
Identification and Marking
The marking and labels of the equipment meet
the requirements of MIL-M-13231.
|
|
Moisture & Fungus Resistance
AVC-301M PC assemblies are moisture resistant and are not nutrients for fungi. The PC Cards are treated with Conformal coating for protection.
The coating conforms to MIL-I-46058C.
External Finishes
The computer external surfaces
are chemically treated prior to painting. All residues and contaminants are removed
prior to applying one coat of primer. The finish is semi-gloss per
FED-STD-595.
Processes and
Treatment
Processes and
treatments (welding, soldering, brazing and corrosion
(resistance protection) of the enclosure is in accordance with
MIL-STD-454.
|
|
|
|
Temperature
The AVC-301M PC
will not be
damaged or affected by the effects of ambient air temperature as follows:
Operating
The AVC-301M PC shall meet
performance requirements specified herein after exposure to temperatures from
-55° to 71°C.
(Storage and transportation)
-55° to 85°C.
Sand and
Dust
The AVC-301M PC shall operate as
specified herein while and after being subjected to sand and dust as
encountered in dry arid arias. The AVC-301M PC shall meet the
requirements specified in MIL-STD-810F.
Salt Fog
The AVC-301M PC
is resistant to
the corrosive effects of salt fog environment. The AVC-301M PC meets the requirements specified in
MIL-STD-810F Method 509.3
Procedure I. The base metal shall not be visible through the finish or coating, nor shall
be any evidence of blistering, softening, separation from the base metal,
corrosion products, or other coating failure.
|
|
Vibration
The AVC-301M PC is qualified
according to MIL-STD-810F for airborne, ground and Naval environment.
Shock
The AVC-301M PC operates as
specified herein after being subjected to operational shock as encountered on board vehicle or
Helicopter.
Relative
humidity
The
AVC-301M PC, in an operating or
non operating condition, shall not be affected by humidity for both
continuous and intermittent periods, including conditions wherein
condensation takes place in and on the equipment in the form of
water. The AVC-301M PC meets the requirements specified in MIL-STD-810F.
Operating
- 95% RH with
no condensation.
Non-operating - 95% RH.
Fungus
The AVC-301M PC is non-nutrient to fungus growth per the requirements specified in MIL-STD-810F.
|
|
|
|
|
|
Home
Products
Contact
|
